CISCIO NEW UPDATED: New Updated 350-080 Exam Questions from Braindump2go 350-080 PDF Dumps and 350-080 VCE Dumps! Welcome to Download the Newest Braindump2go 350-080 VCE&PDF Dumps: http://www.braindump2go.com/350-080.html (394 Q&As)
2015 Latest 350-080 Real exam questions to master and practice upon! Braindump2go Offers the New Updated Cisco 350-080 394 Exam Questions in PDF & VCE files that can also be downloaded on every mobile device for preparation!
350-080 Dumps,350-080 Exam Dumps,350-080 Brainfump,350-080 Questions,350-080 VCE,350-080 PDF,350-080 Actual Test,350-080 Study Guide,350-080 Book,350-080 CCIE Data Center Written Exam,350-080 Test
On the Cisco Nexus 7000 Series Switch, Control Plane Policing is enforced on which component?
A. The supervisor module enforces CoPP before out-of-policy traffic reaches the CPU
B. The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPU
C. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPU
D. The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches the CPU
You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1/18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debug output?
2012 Feb 23 23:00:08.676710 pim:  (default-base) Received unauthenticated hello-message from 10.1.1.2 on Ethernet1/18, message discarded
2012 Feb 23 23:00:12.528763 pim:  (default-base) Send Hello with AH on Ethernet1/18 from 10.1.1.1, holdtimE. 105 secs, dr-priority: 1
A. The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.
B. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to
C. The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.
D. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting
E. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.
What is the benefit of using Anycast RP via RFC 4610 for IP multicast RP redundancy?
A. Improves convergence of the multicast network due to enhanced RPF checks
B. Simplifies the number of control plane protocols over other RP redundancy methods
C. Eliminates the use of Protocol Independent Multicast (PIM) in the topology
D. Increases the administrative distances in Multicast Source Discovery Protocol (MSDP) configuration
Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.)
A. M1, M2, and F1 cards are allowed in the same VDC.
B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.
C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity.
D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set.
E. The F2 line card must reside in the admin VDC.
Overlay Transport Virtualization (OTV) uses the Authoritative Edge Device (AED) to perform which tasks?
A. The AED is responsible for sending all unicast traffic in a site, while either node in a site can transmit
multicast and broadcast.
B. The AED is responsible for load balancing all traffic for all VLANs across the transport network.
C. The AED is responsible for handling all unicast, broadcast, and multicast traffic for a given VLAN
within a site.
D. The AED is responsible for MAC address dispute contention for a given VLAN.
Which three statements about the DHCP snooping feature on Cisco Nexus switches are true? (Choose three.)
A. DHCP snooping commands are not available until the feature is enabled with the feature dhcp- snooping
B. When you enable the DHCP snooping feature, the switch begins building and maintaining the DHCP
snooping binding database.
C. The switch will not validate DHCP messages received or use the DHCP snooping binding database
to validate subsequent requests from untrusted hosts until DHCP snooping is enabled globally and
for each specific VLAN.
D. Globally disabling DHCP snooping removes all DHCP snooping configuration on the switch.
E. Globally disabling DHCP snooping does not remove any DHCP snooping configuration or the configuration
of other features that are dependent upon the DHCP snooping feature.
Which three statements describe user authentication in Cisco DCNM-LAN? (Choose three.)
A. Cisco DCNM-LAN server users are local to the Cisco DCNM-LAN server. Creating, changing, and
removing Cisco DCNM-LAN server users has no effect on user accounts on managed devices.
B. A Cisco DCNM-LAN server user that has Administrator privileges can push out changes to managed
devices even if the Cisco NX-OS role that is used on the discovered device has the network operator role.
C. Cisco DCNM-LAN user roles restrict the ability of users to make changes to Cisco DCNM-LAN server
settings. Cisco NX-OS user roles enforce read/write privileges on the discovered devices.
D. Cisco DCNM-LAN allows you to configure unique credentials for each discovered device or use default
credentials when you do not configure unique credentials for a device.
E. Cisco DCNM-LAN can use AAA servers to authenticate users. Only TACACS servers are supported.
What is the reason why this user is not able to enter configuration commands?
Nexus# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Nexus(config)# interface Loopback10
% Permission denied
no Negate a command or set its defaults
username Configure user information.
end Go to exec mode
exit Exit from command interpreter
A. The user did not enter enable prior to going into configuration mode.
B. The software license installed on Nexus is Layer 2 only, which does not allow the creation of
Layer 3 interfaces.
C. The user RBAC role is set to network-operator.
D. The user failed authentication and user access defaulted to read-only mode.
E. The AAA server is currently not responding.
Which three statements describe the configuration change management feature in DCNM LAN? (Choose three.)
A. Switch profiles allow configurations to be synchronized between switches and are supported with
any Cisco NX-OS Software managed device.
B. DCNM LAN can archive configurations from devices even if they are not managed by the DCNM
server, and the administrator can supply the device management IP address and credentials.
C. You can archive a maximum of 50 configuration versions per managed device.
D. Managed devices must be licensed in DCNM LAN before they can be used with configuration change
E. Device-running configuration will be archived only if it differs from the last archived version.
Which three statements best describe HSRP configuration on Cisco Nexus switches? (Choose three.)
A. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers
will forward data traffic. No additional configuration is required.
B. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers
will forward data traffic if the peer-gateway feature is enabled.
C. You can configure two overlapping HSRP groups to load share traffic from the connected hosts while
providing the default router redundancy.
D. You can use the show standby command to verify HSRP operation and configuration.
E. If you remove the feature hsrp command, all relevant HSRP configuration information is also removed.
Braindump2go Regular Updates of Cisco 350-080 Preparation Materials Exam Dumps, with Accurate Answers, Keeps the Members One Step Ahead in the Real 350-080 Exam. Field Experts with more than 10 Years Experience in Certification Field work with us.
FREE DOWNLOAD: NEW UPDATED 350-080 PDF Dumps & 350-080 VCE Dumps from Braindump2go: http://www.braindump2go.com/350-080.html (394 Q&A)
|One Time Purchase||✔||✖||✖||✖||✖|
|100% Pass Guarantee||✔||✖||✖||✖||✖|
|100% Money Back||✔||✖||✖||✖||✖|